Contact Us
TEL : +86-512-57762267
E-mail: robin@leadsail.cn
Address: NO.1288, Chengbei Middle Road, Kunshan, Suzhou, Jiangsu, China
Home > News > Content
CMM Operation Considerations
Nov 06, 2017

1, the probe to touch the workpiece should be as far as possible with the workpiece's measured surface to maintain a vertical direction.

The correct and effective use of probes to touch the measuring workpiece can avoid the production of unnecessary errors in many measurements. However, in the actual touch of the point, at least to maintain and perpendicular to the angle of the ±30° within the surface. The repetition accuracy of the measurement is produced to prevent the probe slipping. The accuracy of the data can be realized by using the system probe compensation.

2. Pay attention to the effective length of the probe to avoid the large error caused by the insufficient length.

3. It is required to carry out the measurement operation under constant pressure. Otherwise, the measurement accuracy is affected.


Previous: Maturity Model